LEWITT MTP 840 DM Dynamic Vocal Microphone


  • ₱12,500.00




Product Description

MTP 840 DM

Your mic to cut through the densest of live mixes.

The MTP 840 DM is a supercardioid handheld performance microphone. Its tailored frequency response ensures that your vocals will cut through every mix. The unique Active Mode boosts sensitivity by up to 12 dB while output impedance stays low.

Refined electronics and superior capsule design make the MTP 840 DM a unique tool for onstage use.

Active mode to boost sensitivity

Give your signal some extra gain.

Boost your signal by up to 12 dB via a phantom-powered amplifier in Active Mode for ear-catching realism and distortion-free sonic depth.


Tailored vocal sound

Plug in and rock. No EQ required.

We tailored the frequency response to make your vocals cut through even the densest mix, with great presence and clarity.

Plus, you do not require an EQ to be heard. Just plug it in and perform.


Low-cut settings

Improve clarity.

Remove the mesh, and you'll find switches to activate a low-cut at 150 Hz or 250 Hz to reduce structure-borne noise. You can tame the proximity effect and adapt the mic to your individual preference.


Supercardioid polar pattern

Be fully protected against feedback.

The supercardioid polar pattern allows for high gain before feedback and guarantees maximum isolation of your voice - side and rear sounds are effectively rejected.

  • Dynamic vocal microphone
  • Active mode to boost sensitivity
  • Tailored vocal sound
  • Low-cut settings
  • Supercardioid pattern


Type Dynamic, moving coil
Acoustical operating principle Pressure gradient transducer
Polar pattern Supercardioid
Frequency range 40 ... 18,000 Hz
Sensitivity 3.5 mV/Pa, -49 dBV/Pa
Signal / noise ratio 75 dB (A)
Equivalent noise level 19 dB (A)
Dynamic range, passive mode 135 dB
Dynamic range, active mode 121 dB, 0 dB gain / 115 dB, 6 dB gain / 109 dB, 12 dB gain
Gain settings, active mode 0 dB, 6 dB, 12 dB
Low-cut filter linear, 150 Hz (12 dB/oct), 250 Hz (12 dB/oct)
Internal impedance 600 Ω
Rated load impedance 1,000 Ω
Supply voltage 48 V ± 4 V
Current consumption 5.5 mA 
Connector Gold plated 3-pin XLR
Microphone dimensions 51 dia. x 183 mm, 2 dia. x 7.2 in
Microphone net weight 336 g, 11.85 oz

We Also Recommend



Sold Out