Free The Tone PT-3D Isolated DC Power Supply
Product DescriptionAlthough it is light and compact, the PT-3D furnishes two completely independent isolated output terminals (9 VDC/500 mA) and six low-noise standard output terminals (9 VDC/100 mA) and can power up to eight lines. The PT-3D's isolated output terminals can supply current higher than 1 A momentarily required by some digital effects units on boot. After booting of the units, the PT-3D can stably continue to supply required amperage up to 500 mA. This makes the PT-3D, which is designed to supply 9 VDC, applicable to effects units requiring high capacity current (such as DigiTech¨ WHAMMY DT/WHAMMY 5, Eventide¨ TIME FACTOR/MOD FACTOR/PITCH FACTOR /SPACE/H9, LINE6¨ DL4/MM4/FM4, Strymon¨ TIMELINE/MOBIUS).
- Like other PT series products, rigidity and lightness are attained by making the housing of Japanese-made aluminum alloy used in aircraft parts.
- Two completely independent isolated output terminals (9 VDC/500 mA) and six low-noise standard output terminals (9 VDC/100 mA) can power up to eight lines.
- Each 9VDC output terminal is stabilized and powers the effects unit via the separate noise filter and short-circuit protection circuit.
- The noise level of the power from the low-noise standard output terminal is greatly reduced by passing through the 2-step noise filter and the output voltage is set to approximately 9.8 VDC in order to reproduce the condition of power being supplied from a brand-new battery.
- The isolated output terminals can supply current higher than 1A momentary required by some digital effects units on boot.
- Since the two isolated output terminals are completely independent each other and electrically insulated, no ground loop noise will occur. External digital noise via mains power supply lines is rejected.
- The supplied DC power cables are not applicable to effects units from Eventide¨ or LINE6¨. Customers need to prepare suitable cables for use with such units.
- Proper basic operations on the products noted above (DigiTech¨, Eventide¨, LINE6¨, Strymon¨) have been confirmed by FREE THE TONE (as of November 11, 2013). However this does not guarantee full operation of each product.
- Due to modifications or minor changes that might be made by a manufacturer of those products after our confirmation, the above-mentioned products may no longer be compatible with the PT-3D. As a precaution, before connecting, be sure to confirm the power requirements of the device to be connected to the PT-3D.
- The DC cable supplied with the PT-3D can be used with the following models. DigiTech¨ WHAMMY DT/WHAMMY 5 Strymon¨ TIMELINE/MOBIUS
- The PT-3D can be used for the following models by using the FREE THE TONE conversion cable . Eventide¨ TIME FACTOR/MOD FACTOR/PITCH FACTOR/SPACE LINE6¨ DL4/MM4/FM4
- 2 Stabilized 9 VDC isolated output terminals (@ max. 500 mA)
- 6 Stabilized 9 VDC low-noise standard output terminals (@ max. 100 mA)
- Short-circuit protection circuit in each output
- Dimensions: 120W 55D 35H mm (excl. rubber feet)
- Weight: approx. 185 g (excl. accessories)
- Accessories: warranty card, manual, 4 DC cables (L = 30 cm, L/L), 4 DC cables (L = 50 cm, L/L), 1 AC adapter (FA-1220D-JA/UK/EU)
We Also Recommend
Bourns 250k / 500k NO LOAD Potentiometer Linear Taper 3/8 Tall Bushing US Size 24 Spline Split Shaft High Torque
Regular price ₱380.00 ₱380.00