Cioks DC10 Link 8 Isolated 10 Output Power Supply 9/12/18V
DC10 is a professional multi-output power supply for effect pedals. It has 10 regulated and well-filtered DC outlets configured in 8 isolated sections. With a total of 1.600mA it’s a perfect solution for bigger rigs with pedals only using a DC power source. Its three powerful sections with 400mA each will power pedals with special requirements like Strymons, Eventides, tc Nova or Helicon pedals, Moogerfoogers, Radial Tonebone pedals or others without the need of special cables. Selectable with a switch DC10 offers voltages 9, 12 and 15V, and combined with the included Stack Flex or Series adapter Flex also 18 and 24V. The first 4 isolated outlets offering 4x100mA are perfect for standard 9V low current pedals.
- 10 outlets configured in 8 isolated sections
- toroidal transformer with additional electromagnetic field shielding
- 3 powerful DC sections with 400mA each
- 15V option for Radial Tonebone pedals
- short circuit protection of all outlets
- advanced LED monitoring of each section
- temperature monitoring
- 120 or 230V mains voltage operation
- a total of 16 Flex cables included
- Split Flex for powering two pedals of one outlet included
- Stack Flex and Series adapter Flex for powering 18 or 24V pedals included
- compatible with Pedaltrain and Temple Audio pedalboards
- mounting bracket and all pedalboard mounting hardware included
Outlet 1-4: 9V DC / 100mA each
Outlet 5-6: 9 or 12V DC / 200mA each*
Outlet 7-8: 9 and 12V DC / 400mA
Outlet 9-10: 9 and 12 or 15V DC / 400mA
* can be merged into a 400mA section
Size: 158x98x35mm (excl. detachable rubber feet)
Warranty period: 5 years worldwide
DC10 CIOKS DC10 – Professional power supply for effect pedals with 10 outlets
Mounting CIOKS DC10 or another CIOKS PRO power supply under Pedaltrain classic or novo
This is a step-by-step guide on how to mount CIOKS DC10 power supply or any other from CIOKS professional range under a Pedaltrain classic or novo pedalboard.
Mounting CIOKS DC10 or another CIOKS PRO power supply under a Templeboard
This is a step-by-step guide on how to mount CIOKS DC10 power supply or any other from CIOKS professional range under a Temple Audio pedalboard. The procedure is the same with our AC10 power supply which mechanically is exactly the same as the DC10.
CIOKS - DC10 Mounting Guide under Pedaltrain boards
This one also treats mounting of the DC10 and shows how to attach the DC10 under either the new Pedaltrain classic or novo or the older types of Pedaltrain boards with two holes in the back using the additional needed accessory PTkit – Pedaltrain mounting kit or just a set with taller feet.
We Also Recommend
Bourns 250k / 500k NO LOAD Potentiometer Linear Taper 3/8 Tall Bushing US Size 24 Spline Split Shaft High Torque