Behringer 110 VCO/VCF/VCA Legendary Analog VCO/VCF/VCA Module for Eurorack

Product Features

• Amazing VCO/VCF/VCA module from the '80s

• Authentic reproduction of original "System 100M" circuitry

• Complete synth voice with internal patched signal flow for ease of use

• VCO features 3 selectable waveforms (triangle, ramp and square with PWM)

• VCO offers pitch control over a wide range plus 1 audio output and 2 CV inputs

• VCF features cutoff, frequency and resonance controls plus 2 audio inputs and 2 CV inputs

• Oscillator PWM with manual and external CV control

• VCA features gain control plus 2 audio inputs, 2 audio outputs (low/high) and 2 CV inputs

• 17 controls and switches give you real-time access to all important parameters

• Eurorack specs: 16 HP, 60 mA +12 V, 50 mA -12 V

• 

  Modular Synthesis

  The 80s was the golden age of electronic music. Synthesizers were at their prime and almost every hit song and movie soundtrack at that time had a synth in one form or another. Modular synths have become more and more popular with professionals and enthusiasts over the years and they’re about to get even better.

  

  SYSTEM 100 110 VCO/VCF/VCA

  This is the Behringer System 100 110 VCO/VCF/VCA Module. An authentic reproduction of the original “System 100M” circuitry from the 80s that can fit in a standard Eurorack case. The best part? It’s at a very affordable price. Mix the 110 in with your existing rig or start your modular synth journey from here. Either way you’re sure to have a lot of fun!

  

  Controlling the Oscillator

  The 110 comes with a complete synth voice with an internally patched signal flow for ease of use and to save patching time so you can focus on your music. You can vary the VCO section by selecting one of three waveforms; triangle, ramp and Pulse Width Modulation which can be adjusted by the Mod Manual knob. The VCO also offers pitch and range control knobs as well as one audio output, which can be routed to another source, and two CV inputs.

  

  VCF and VCA

  The VCF features cutoff frequency and resonance sliders while the VCA comes with two audio outputs (low/high). Both the VCF and VCA each feature two audio inputs and two CV inputs that allow for other sources to be plugged into the 110, making it a must-have in any modular synth.

  

  Eurorack Ready

  Installing the 110 VCO/VCF/VCA is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and mount the module using the included screws. This allows for the 110 VCO/VCF/VCA to be mixed with other synth modules for a truly unique set up.

  

  
  

  Whether you’re just getting into modular synths or looking to complete your collection, the 110 VCO/VCF/VCA module from Behringer is a great tool to have when creating amazing music. 

  
  

  Get the 110 VCO/VCF/VCA from your local Behringer dealer today! 

  Specification

  Inputs

  Pulse width mod
  Type	3.5 mm TS jack, DC coupled
  Impedance	>70 kΩ, unbalanced
  Maximum input level	0 V to +10 V, 4% per volt
  Signal input
  Type
  Impedance	>50 kΩ, unbalanced
  Max input level	+17 dBu @ unity gain
  VCO mod input
  Type	2 x 3.5 mm TS jacks, summed
  Impedance	>50 kΩ, unbalanced
  CV range	0 V to +10 V, 1 V/oct
  VCF mod input
  Type	2 x 3.5 mm TS jacks, summed
  Impedance	>50 kΩ, unbalanced
  CV range	0 V to +10 V, 1 V/oct
  VCA mod input
  Type	2 x 3.5 mm TS jacks, summed
  Impedance	>50 kΩ, unbalanced
  CV range	0 V to +10 V, typically 1 V per 10 dB

  Outputs

  VCO output
  Type	3.5 mm TS jack, DC coupled
  Impedance	1 kΩ, unbalanced
  Max output level	10 V p-p
  Frequency range with no external CV	<10 Hz to 500 Hz
  Frequency range using external CV	<1 Hz to 30 kHz
  VCA output
  Type	2 x 3.5 mm TS jacks, AC coupled
  High impedance	1 kΩ, unbalanced
  Low impedance	3 kΩ, unbalanced
  High max output leve	+18 dBu
  Low max output level	-2 dBu
  High output noise	<-60 dBu, 22 Hz -22 kHz
  Low output noise	<-80 dBu, 22 Hz -22 kHz

  Controls

  Pulse width manua	50% to min
  Waveform	Triangle, sawtooth, pulse
  Range	32’, 16’, 8’, 4’, 2’
  Pitch	2 octave range
  Cutoff frequency	20 Hz to 20 kHz
  Resonance	Off to self oscillation
  Sig in level	-∞ to unity gain
  Mod in level	-∞ to unity gain
  VCA initial gain

  Power

  Power supply	Eurorack
  Current draw	80 mA (+12 V), 50 mA (-12 V)

  Physical

  Dimensions	81 x 129 x 46 mm (3.2 x 5.1 x 1.8")
  Rack units	16 HP
  Weight	0.19 kg (0.42 lbs)

   

  Videos

  Behringer System 100 – 110 VCO/VCF/VCA Eurorack Module